Does anyone know whether Meraki will be implementing support for BGP communities?
Ideally I was hoping to set a BGP community to routes advertised via VPNs towards the VPN concentrator /Hubs.
For example, from a site, routes via the primary VPN set a BGP community of 1000:1, and routes via the Secondary VPN to 2000:1.
This will then allow me to manipulate routing within the core network by matching BGP communities.
Thanks in advance.
I think the best solution will be to set the community on the peer that the VPN concentrators are attached to (aka, when your core devices are receiving the routes).