Access MX local Mgmt page through MPLS VPN remote site.

Solved
Ahmed_Fathy
Comes here often

Access MX local Mgmt page through MPLS VPN remote site.

Can I access MX local Mgmt page remotely through MPLS connected on MX LAN ports (ping works fine) or should the endpoint (ex: laptop, PC.....) used for Mgmt be directly connected and in the same LAN...….. or as long as there is a reachability to MX then i can access its local web Mgmt page? and if not,.... is there any workaround ?

 

note: MPLS is reachable to MX through static route. 

1 Accepted Solution
Ryan_Miles
Meraki Employee
Meraki Employee

Do you have remote device status pages enabled? If so, you should be able to reach the local status webpage via any reachable/route-able LAN IP on your MX.

 

https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Me...

View solution in original post

1 Reply 1
Ryan_Miles
Meraki Employee
Meraki Employee

Do you have remote device status pages enabled? If so, you should be able to reach the local status webpage via any reachable/route-able LAN IP on your MX.

 

https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Me...

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels