Meraki

Syed · ‎Oct 5 2018

How can i clear IP arp on MX?

Adam · ‎Oct 7 2018

Did you try rebooting the MX?

Adam R MS | CISSP, CISM, VCP, MCITP, CCNP, ITILv3, CMNO
If this was helpful click the Kudo button below
If my reply solved your issue, please mark it as a solution.

PhilipDAth · ‎Oct 7 2018

Alas on the MX @Adam is right. You will need to reboot the MX.

Syed · ‎Oct 8 2018

Okay Philip

wirednot · ‎Jul 19 2019

Just ran into this. It's inexcusable to have to reboot the MX just to clear ARP. Really clueless on Meraki's part.

tyoung · ‎Jun 12 2020

That is inexcusable. I am replacing another vendor with a Meraki switch that connects to an MX. We will have to reschedule to off hours just so I can reboot the MX to clear the ARP table.

tyoung · ‎Jul 13 2020

To reply to my own post, we just used a different IP address for the new device. We changed the next hop on the MX. We did not reboot the MX in a maintenance window in order to clear the ARP cache.

Syed · ‎Oct 8 2018

No Adam, I thought so reboot might be needed, but doesn't looks good that rebooting MX just for clearing arp. Actually had an issue with IP conflict, source switch rebooted and issue resolved.