cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

AMP in passthrough mode

Here to help

AMP in passthrough mode

Hi community, I am new here so please apologize if i missed something.
in my setup the mx is in passthrough in between a router and an ms350 which have ospf running. AMP is not doing anything but if i change the MX to NAT mode AMP works. Could it be that this is the standard behaviour? thanks for guidance
3 REPLIES 3
Just browsing

Re: AMP in passthrough mode

Hi,

 

 

Security and content filtering should work according to :

https://documentation.meraki.com/MX-Z/Networks_and_Routing/Passthrough_Mode_on_the_MX_Security_Appli...

 

 

Highlighted
Getting noticed

Re: AMP in passthrough mode

That's not standard behaviour. AMP works for us in passthrough.

Here to help

Re: AMP in passthrough mode

thanks all for the replies.

the solution to my problem was fairly easy. I did do a reset of the MX via the reset button, checked the settings afer it came up and ... boom it worked.  Now it is doing fine as documented.

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.