Switching from traditional Cisco to Meraki?

[aoudh]

hello everyone..

I would like to change from catalyst to Meraki and I want to know which the best of the following replacement

Cisco Catalyst 3560G Series POE-48

Cisco Catalyst 3650 48 POE+ 4X1G

Cisco Catalyst 3850 12S

[PhilipDAth]

Hi @aoudh

You should post this as a new topic.  It is not related to the existing topic.

[PhilipDAth]

If you want to take the opportunity to upgrade to a 10Gbe core, then I would go with:

MS425-16 to replace the 3850 12S

https://meraki.cisco.com/products/switches/ms425-16 

If the others are just used for access and don't need redundant power, then the MS225.

https://meraki.cisco.com/products/switches/ms225-48

If you want to stick with just Gigabit everywhere, then:

MS410-16 to replace the 3850 12S

https://meraki.cisco.com/products/switches/ms410-16

If the others are just used for access and don't need redundant power, then the MS210.

https://meraki.cisco.com/products/switches/ms210-48

[Johnfnadez]

Hi,

You could perfectly change them for MS225-48P.