Comment below with what you think is the correct answer and remember: if you like the question or the ECMS questions initiative, leave a kudo.
See you in a week with the correct answer!
ECMS practice question
Refer to the exhibit. Which of the following is true?
P.S. We will be sharing new practice questions weekly! If you'd like to receive updates when we do, click the "ECMS Practice" label below and then "Subscribe”
Here you can find previous questions
Solved! Go to solution.
Correct answer: D
As always thanks for your participation and for the cryptic spoiler free answers!
Uplink port are marked with the white arrow.
https://documentation.meraki.com/MS/Monitoring_and_Reporting/Switch_Port_View
Three aces and two Kings 😉
No Princes but a Duke
I am not sure if this question is really accurate. Why?
And again, I don't get the two hints above ... 😪😫
BTW: The answer is song four on side one of "The Miracle".
(Ok, the millennials will now say "side one???" what is he talking about??? ...)
@KarstenI your logic is perfect, I agree entirely but went with my option as the other isn't a choice...
Maybe you are overthinking it?
If it was a member of a stack with no active POE usage and no internet uplink and one port STP blocked ....What would it look like? All the things they havent told you or shown you cannot be a factor in this question surely?
Answer
@AB_LaDigue67 perfect point, as there is no UL then our chosen answer has to be true!
@AB_LaDigue67 wrote:Maybe you are overthinking it?
Yes, I heard that before .. But it really was only a flaw in my logic!
@KarstenII have not got a stack at home but wondered would the status be green on those icons if stack cables just plugged in? Orange maybe?
@AB_LaDigue67 @KarstenI was right that they go green just by being connected, but every non stacked switch needs an UL if is is connected to the dashboard in the ☁️
When I configure remotely a stack the cables are typically already connected by the on-site technician. I do not remember it not to be green when I start with it. But I would not vouch for it. After configuring, it often turns temporary orange complaining about wrong DNS or VLAN.
Correct answer: D
As always thanks for your participation and for the cryptic spoiler free answers!
Uplink port are marked with the white arrow.
https://documentation.meraki.com/MS/Monitoring_and_Reporting/Switch_Port_View