ECMS Practice Question - Jul 23rd

[SandroNardi]

Comment below with what you think is the correct answer and remember: if you like the question or the ECMS questions initiative, leave a kudo.

See you in a week with the correct answer!

ECMS practice question

Refer to the exhibit. This is the configuration for an SSID to be used as MR Teleworker VPN.

Which of the following statements is true regarding clients connecting to an SSID with no firewall & traffic shaping rules and this configuration applied?

1. Clients connected will be able to communicate with each other
2. Clients with a static IP address will not be able to associate with this SSID
3. Clients connecting to this SSID will receive IP addresses in an isolated 10.0.0.0/8 network
4. Clients traffic with destination IP address 8.8.8.8 will always be sent over the VPN tunnel

P.S. We will be sharing new practice questions weekly! If you'd like to receive updates when we do, click the "ECMS Practice" label below and then "Subscribe”

Here you can find previous questions

[Bruce]

Tricky one, had to use the ‘three are wrong, so the other must be right method’, and I think that got me a correct answer.

[KarstenI]

I am with @Bruce here. Three answers are definitely wrong so I didn't even had to look up the default of the one answer left... 😉 

[PhilipDAth]

Tough one.  Here are my thoughts.

Spoiler

a. Based on the comment, the concentrator subnet is 172.16.1.0/24.  Clients should get an IP from this subnet, it's included in AutoVPN, so they should be able to talk to each other.  So this is a possible answer.

b. Mandatory DHCP is disabled, so static IP addresses are allowed.  This answer can not be correct.

c. Based on the comment that the concentrator VLAN is 172.16.1.0/8 this answer can not be correct.

d. 8.8.8.8 is not in the AutoVPN include list, so it can't be correct.

So only 'A' is correct.

[SandroNardi]

The correct answer is A!

Thanks everyone, for the detailed answers and considerations, I'm inspired to do some additional tests for this configuration.