Below are the most important changes to our documentation between September 22nd and September 29th:
Using the Cisco Meraki Device Local Status Page
Change: Added note explaining local status page access when running MX HA.
MX Addressing and VLANs
Change: Added note stating that enabling VLANs changes VPN VLAN participation to last known state when VLANs were enabled.
3G/4G Cellular Failover with USB Modems
Change: Added instructions for retrieving the USB ID with Windows machines.
MX Uplink Settings
Change: Added notes on changing WAN IP via dashboard with single WAN link. Updated FAQs
Approximating Maximum Clients per Access Point
Change: New article
MA-UMNT-MR-A2 Universal Mounting Adapter Installation Guide
Change: Updated AP models
MS Switch Access Policies (802.1X)
Change: Added RADIUS Attributes sent by MS switches to RADIUS server for configured access policies.
VPN Concentrator Deployment Guide
SSID Tunneling and Layer 3 Roaming - VPN Concentration Configuration Guide
Change: Updated to state SSID concentration in Routed Mode is supported
Deploying Highly Available vMX100s in Azure
Change: Updated hyperlinks and minor edits & corrections.