Below are the most important changes to our documentation between March 16th and April 26th:
vMX100 to vMX S/M/L Transition FAQ
Change: New article
Common Dashboard Alerts for Device Connectivity
Change: Article refresh and new section added – “Bad Internet Connection”
Device Posturing using Cisco ISE
Change: Update with link to ISE documentation
Using Layer 3 Firewall Rules
Change: Added note to state L3 rules in group policy configs are stateless.
Configuring SAML Single Sign-on for Dashboard
Change: Added note with best practices for opening cases for SAML users.
Best Practices for Meraki Firmware
Change: General refresh
WPA2-Enterprise PEAP Android 11 Security Issues
Change: New article
Troubleshooting Client VPN
Change: Merged multiple troubleshooting documents
Product End-of-Life (EOL) Policies
Change: Updated EOS models
Cloud Data Retention Policies
Change: New article
WPA3 Encryption and Configuration Guide
Change: Added MR44, MR76 and MR86 to the document
MG Templates Best Practices
Change: New article
Client VPN OS Configuration
Change: Updated with recent Ubuntu version
WPA3 Encryption and Configuration Guide
Change: Added note stating WPA3 is enabled by default on wireless networks with MR27.X
Meraki Health Overview
Meraki Health - MR Access Point Details
Meraki Health - Client Details
Change: Meraki Health articles reformatted into 3 new articles.
MS390 Series Installation Guide
Change: Updated recommended firmware code.
MX Routing Behavior
Change: Updated explanation around static route tracking.
PoE Support on MS Switches
Change: Updated with specifics on MS390 POE behavior
Cisco Meraki Firmware FAQ
Change: Removing specific device types from a combined network does not prevent the firmware upgrade manager from representing combined networks as separate items.
MR46 Datasheet
Change: Updated feature listing.
Out-of-Band Log Fetching
Change: Added more detailed instructions for file transfer.
MT Troubleshooting Guide
Change: New article
Setting Custom DHCP Options
Change: General refresh
Low Power Mode on Cisco Switches
Change: Updated with applicable APs
Web Clips in Systems Manager
Change: General refresh
MX Cold Swap - Replacing an Existing MX with a Different MX
Change: Added note stating you cannot remove the only security appliance from a network that is tracking by unique client ID.
Organization Settings
Change: Clarified that “Strong password” also requires that common words or names cannot be used.
Moving Devices between Organizations
Change: Clarified that static IPs of devices will change without support interaction.
Network-Based Application Recognition (NBAR) integration with MR access points
Change: Updated NBAR application count.
Children's Internet Protection Act (CIPA) Compliancy with WiFi
Change: General refresh
