Documentation Digest: June 21st - July 21st

[CameronMoody]

Hi Community,

Below are the most important changes to our documentation between June 21st and July 21st:

Adaptive Policy Overview

Change: Added WiFi 6E APs to list of supported MRs.

Client Balancing

Band Steering

Wireless Mesh Networking

IPv6 Support on MR Access Points

Change: Added information on feature behavior with MR 29.x.

Enhanced Staged Upgrades

Change: New Article.

Apple Device Enrollment Program (DEP)

Change: Updated for new Assign Setting interface.

Systems Manager Agent Release Notes

Change: Added release notes for version 3.5.2.

Meraki Vision Changelog

Change: Added release notes for up to v1.6.8.

Second Generation MV Cameras: Overview and Specifications

Change: Added MV52 to Technical Breakdown table.

Multi Network Video Walls on Vision Portal [BETA]

Change: New Article.

MT12 Installation Guide - Water Detection

Change: Removed note about rubber caps. New MA-CBL-LEAK-1 don't need them anymore.

[Inderdeep]

@CameronMoody :thanks for the update 

[MyHomeNWLab]

Client Balancing - Cisco Meraki

https://documentation.meraki.com/MR/Other_Topics/Client_Balancing#Client_Balancing_Behavior_-_MR_29....

> Client Balancing Behavior - MR 29.X and Newer Firmware

> An AP can only attempt to load balance the client or reject an association request two times for both active and passive client balancing.  

I've been waiting for this feature! 😍

In high-density wireless environments with many Meraki MRs, Client Balancing may in some cases continue to reject clients.

e.g. The wireless client goes to connect to MR#1 (reject) => MR#2 (reject) => MR#3 (reject) => MR#4 (reject) => MR#1 (reject) ... and so on.

It is good that a limit has been placed on the number of rejections.

I hope to improve the wireless environment!