Hi Community,
Below are the most important changes to our documentation between February 25th and March 31st:
FAQ: Meraki Authentication to Require TLS 1.2 or Later Version
Change: New article.
MG51/51E Technical Specifications
Change: New articles.
Change: New article.
Switching Overview - MS Health
Change: New article.
Change: New article.
Change: New article.
Change: New article.
Cisco Security Applications with Systems Manager for Hybrid Home Office Work Deployments
Change: New article.
Cisco+ Secure Connect - Policy Import
Change: New article.
Event Search on Vision Portal (BETA)
Change: New article.
Cisco+ Secure Connect - IdP Meraki Cloud Authentication
Change: Added section "Deployment".
Cisco+ Secure Connect - Existing Meraki Customer
Cisco+ Secure Connect - Customers without Meraki and Umbrella deployments
Change: Added sections "Using Automatic Key Exchange to Link Accounts" and "Manually Linking Accounts".
Cisco+ Secure Connect - Manage DNS Policies
Cisco+ Secure Connect - Manage Web Policies
Change: Added sections "Overview" and "Adding policies".
Manually Integrating Cisco Umbrella with Meraki Networks
Change: Added sections "Firmware Requirements" and "Licensing Requirements", as well as added note that Manual Integration is mutually exclusion with Automatic Integration on MR.
VPN Full-Tunnel Exclusion (Application and IP/URL Based Local Internet Breakout)
Change: Added note, that Non-Meraki VPN exclusions is not supported with templates at this time.
Using OSPF to Advertise Remote VPN Subnets
Change: Added note, that MX appliances will now properly validate that DBD packets conform to the appropriate MTU size.
Change: Added note about Performance API behavior.
MG Wireless WAN Dashboard Settings
Change: Added notes, that MG templates don't support DHCP Reserved IP Ranges or Fixed IP Assignments.
MG41E and MG51E Cellular Dipole Antenna Datasheet
MG41E and MG51E Cellular Patch Antenna Datasheet
Change: Added MG51E.
MG41 and MG51 Troubleshooting Guide
Change: Added notes that MG51 does not support 3G and to look at the LSP for signal status, if MG51/E does not connect to Dashboard.
MV Mounting Options and Guidelines
Change: Added diagrams with mounting options.
Change: Added note, that Cloud Archive licenses cannot be combined or stacked.
Change: Added release notes for up to v1.7.7.
Configuring Multiple Switch Ports on the Same VLAN
Configuring PoE on MS switches
Determining the RSTP/STP Root Bridge on an MS Switch Network
Spanning Tree Protocol (STP) Overview
Configuring Spanning Tree on Meraki Switches (MS)
Comparing Layer 3 and Layer 2 Switches
MS Layer 3 Switching and Routing
Using the Cable Test Live tool
Dashboard Alerts - Device Health
VLAN Mismatch Alerts for Meraki Switches
Loop and MAC Flap Detection on MS
Troubleshooting and Replacing a Faulty MS Switch
Change: Added references to free online training courses on the Meraki Learning Hub.
Change: Added section "Viewing Switch Stack Role info".
Unidirectional Link Detection (UDLD)
Change: Added note that MS390 support UDLD running MS 15.0 and above.
Change: Added note about expected behavior if monitor-mode Catalyst switches are in the same network.
Cloud Monitoring for Catalyst Eligibility and Requirements for Onboarding
Supported Catalyst 9000 Series Switches (Cloud Monitoring)
Cloud Monitoring for Catalyst Onboarding
Change: Added 9200CX as eligible models for Cloud Monitoring.
Change: Renamed Out-of-Band Log Fetching (OOB) to Support Data Bundle (SDB).
Creating and Deleting Dashboard Networks
Change: Added statement that local device config (eg. static IP address) will not be copied, if new network is cloned from existing network.
Adding and Removing Devices from Dashboard Networks
Change: Added note, that it'll take up to 2 minutes for footage to be deleted, when MV is removed from a network.
