Documentation Digest: February 25th - March 31

JohnIngram
Meraki Employee
Meraki Employee

Documentation Digest: February 25th - March 31

DocDigest_Banner.png

 

 

Hi Community,

 

Below are the most important changes to our documentation between February 25th and March 31st:

 

FAQ: Meraki Authentication to Require TLS 1.2 or Later Version

Change: New article.

 

MG51/51E Technical Specifications

MG51/E Installation Guide

Change: New articles.

 

MG IP Passthrough

Change: New article.

 

Switching Overview - MS Health

Change: New article.

 

Motion Based Retention

Change: New article.

 

Client Roaming Analytics

Change: New article.

 

Network Service Health

Change: New article.

 

Cisco Security Applications with Systems Manager for Hybrid Home Office Work Deployments

Change: New article.

 

Cisco+ Secure Connect - Policy Import

Change: New article.


Event Search on Vision Portal (BETA)

Change: New article.

 

Cisco+ Secure Connect - IdP Meraki Cloud Authentication

Change: Added section "Deployment".

 

Cisco+ Secure Connect - Existing Meraki Customer

Cisco+ Secure Connect - Customers without Meraki and Umbrella deployments

Change: Added sections "Using Automatic Key Exchange to Link Accounts" and "Manually Linking Accounts".

 

Cisco+ Secure Connect - Manage DNS Policies

Cisco+ Secure Connect - Manage Web Policies

Change: Added sections "Overview" and "Adding policies".

Manually Integrating Cisco Umbrella with Meraki Networks

Change: Added sections "Firmware Requirements" and "Licensing Requirements", as well as added note that Manual Integration is mutually exclusion with Automatic Integration on MR.

 

VPN Full-Tunnel Exclusion (Application and IP/URL Based Local Internet Breakout)

Change: Added note, that Non-Meraki VPN exclusions is not supported with templates at this time.

 

Using OSPF to Advertise Remote VPN Subnets

Change: Added note, that MX appliances will now properly validate that DBD packets conform to the appropriate MTU size.

 

Device Utilization

Change: Added note about Performance API behavior.

 

MG Wireless WAN Dashboard Settings

MG Templates Best Practices

Change: Added notes, that MG templates don't support DHCP Reserved IP Ranges or Fixed IP Assignments.

 

MG41E and MG51E Cellular Dipole Antenna Datasheet

MG41E and MG51E Cellular Patch Antenna Datasheet

Change: Added MG51E.

 

MG41 and MG51 Troubleshooting Guide

Change: Added notes that MG51 does not support 3G and to look at the LSP for signal status, if MG51/E does not connect to Dashboard.

 

MV Mounting Options and Guidelines

Change: Added diagrams with mounting options.

 

MV Cloud Archive

Change: Added note, that Cloud Archive licenses cannot be combined or stacked.

 

Meraki Vision Changelog

Change: Added release notes for up to v1.7.7.

 

Switch Deployment and Staging

Switch Stacks

Using Tags to Manage Switches

Assigning a Static IP Address

Switch Ports

Configuring Multiple Switch Ports on the Same VLAN

PoE Support on MS Switches

Configuring PoE on MS switches

Determining the RSTP/STP Root Bridge on an MS Switch Network

Spanning Tree Protocol (STP) Overview

Configuring Spanning Tree on Meraki Switches (MS)

Comparing Layer 3 and Layer 2 Switches

MS Layer 3 Switching and Routing

Layer 3 Switch Example

MS OSPF Overview

Port Schedules

Configuring ACLs

Viewing Your Switches

Network Topology

Switch Traffic Analytics

Switch Port View

Using the Cable Test Live tool

Dashboard Alerts - Device Health

VLAN Mismatch Alerts for Meraki Switches

Loop and MAC Flap Detection on MS

MS DHCP Servers

Troubleshooting and Replacing a Faulty MS Switch

Change: Added references to free online training courses on the Meraki Learning Hub.

 

Switch Stacks

Change: Added section "Viewing Switch Stack Role info".

 

Unidirectional Link Detection (UDLD)

Change: Added note that MS390 support UDLD running MS 15.0 and above.

 

MS Firmware Upgrades

Change: Added note about expected behavior if monitor-mode Catalyst switches are in the same network.

 

Cloud Monitoring for Catalyst Eligibility and Requirements for Onboarding

Supported Catalyst 9000 Series Switches (Cloud Monitoring)

Cloud Monitoring for Catalyst Onboarding

Change: Added 9200CX as eligible models for Cloud Monitoring.

 

Support Data Bundle (SDB)

Change: Renamed Out-of-Band Log Fetching (OOB) to Support Data Bundle (SDB).

 

Creating and Deleting Dashboard Networks

Change: Added statement that local device config (eg. static IP address) will not be copied, if new network is cloned from existing network.

 

Adding and Removing Devices from Dashboard Networks

Change: Added note, that it'll take up to 2 minutes for footage to be deleted, when MV is removed from a network.

0 REPLIES 0
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.