Cisco Secure Connect:
Cisco Secure Connect - IdP Okta SAML Configuration
Change: General article update with detailed descriptions and screenshots.
Cisco Secure Connect - IdP Azure AD SAML Configuration
Change: Added sections "Access the Cisco Umbrella Dashboard" and "Configuring the IdP Integration".
MX:
Calculating MX WAN MAC Addresses
Change: Added Z4/C.
Change: Added "Policy (by Firewall)" definitions.
MR:
Change: Added note that with Wi-Fi telemetry, the number of MQTT messages sent per cycle, or publish frequency duration, may differ depending on the client type configured with further detailed information.
Change: Added note additional note to "Caveats and Limitations", that Wireless devices connected to a WPN-enabled SSID can communicate with wireless devices connected to a different SSID (Non-WPN) if both SSIDs share the same VLAN and further information if wireless client separation between WPN and Non-WPN SSIDs is desired.
Change: Updated 6GHz radio state when powering the AP with 802.3af to "off".
Change: Updated antenna gains for all frequency bands.
MT:
Common Sensor (MT) Event Log Messages
Change: Added "Alert Event", "Ambient Noise", "MT30 Button Press", "IAQ Score", "Probe Cable Connection", "Automation Webhook", "Automation Notification", "Automation Switchport", "Automation Snapshot" and "TVOC".
Change: Added additional FAQs: "How high should the sensor be mounted on the wall?", "What is the sensing range for vape detection?", "What can you do to prevent tampering?", "Can I pair the MT5 with a camera so that I get a snapshot when vape is detected?", "What do you do in response to receiving an alert?" and "How can I test that my MT15 is working for vape detection?".
SM:
Single Sign On Extension Payload
Change: Added note that the Single Sign On Extension is supported on iOS, iPadOS, and macOS across all applications that support Apple's enterprise single sign-on feature; added references to Microsoft Enterprise and Okta SSO extensions.
Systems Manager Agent Release Notes
Change: Added release notes for up to v4.0.
Systems Manager Self-Service Portal
Change: Clarified deprecation date for the old Self Service Portal (February 4th 2023).
General Administration:
Change: Updated MS DHCP log description to "DHCP-related errors (when DHCP is enabled on a L3 interface)".
Small-Form Factor Pluggable (SFP) and Stacking Accessories
Change: Added note that Cisco Meraki offers branded SFP modules, and while we do not prevent third-party accessories from functioning, users should conduct their own tests to ensure proper compatibility.
Meraki End-of-Life (EOL) Products and Dates
Change: Added E3N-VMX100, EAB-VMX100-3Y and EAB-VMX100-5Y.
Change: Added "Requirements and limitations" for Access Points.
Configuring SAML SSO with Azure AD
Change: Added section "Testing the SSO Configuration".
