Documentation Digest: December 9th - December 15th

JohnIngram
Meraki Employee
Meraki Employee

Documentation Digest: December 9th - December 15th

DocDigest_Banner.png

 

Cisco Secure Connect:

Cisco Secure Connect - IdP Okta SAML Configuration

Change: General article update with detailed descriptions and screenshots.

 

Cisco Secure Connect - IdP Azure AD SAML Configuration

Change: Added sections "Access the Cisco Umbrella Dashboard" and "Configuring the IdP Integration".

 

MX:

Calculating MX WAN MAC Addresses

Change: Added Z4/C.

 

Firewall Logging

Change: Added "Policy (by Firewall)" definitions.

 

MR:

MR MQTT Data Streaming

Change: Added note that with Wi-Fi telemetry, the number of MQTT messages sent per cycle, or publish frequency duration, may differ depending on the client type configured with further detailed information.

 

Wi-Fi Personal Network (WPN)

Change: Added note additional note to "Caveats and Limitations", that Wireless devices connected to a WPN-enabled SSID can communicate with wireless devices connected to a different SSID (Non-WPN) if both SSIDs share the same VLAN and further information if wireless client separation between WPN and Non-WPN SSIDs is desired.

 

CW9163E Datasheet

Change: Updated 6GHz radio state when powering the AP with 802.3af to "off".

 

CW9162 Datasheet

Change: Updated antenna gains for all frequency bands.

 

MT:

Common Sensor (MT) Event Log Messages

Change: Added "Alert Event", "Ambient Noise", "MT30 Button Press", "IAQ Score", "Probe Cable Connection", "Automation Webhook", "Automation Notification", "Automation Switchport", "Automation Snapshot" and "TVOC".

 

MT15 FAQ

Change: Added additional FAQs: "How high should the sensor be mounted on the wall?", "What is the sensing range for vape detection?", "What can you do to prevent tampering?", "Can I pair the MT5 with a  camera so that I get a snapshot when vape is detected?", "What do you do in response to receiving an alert?" and "How can I test that my MT15 is working for vape detection?".

 

SM:

Single Sign On Extension Payload

Change: Added note that the Single Sign On Extension is supported on iOS, iPadOS, and macOS across all applications that support Apple's enterprise single sign-on feature; added references to Microsoft Enterprise and Okta SSO extensions.

 

Systems Manager Agent Release Notes

Change: Added release notes for up to v4.0.

 

Systems Manager Self-Service Portal

Change: Clarified deprecation date for the old Self Service Portal (February 4th 2023).

 

General Administration:

Meraki Event Log

Change: Updated MS DHCP log description to "DHCP-related errors (when DHCP is enabled on a L3 interface)".

 

Small-Form Factor Pluggable (SFP) and Stacking Accessories

Change: Added note that Cisco Meraki offers branded SFP modules, and while we do not prevent third-party accessories from functioning, users should conduct their own tests to ensure proper compatibility.

 

Meraki End-of-Life (EOL) Products and Dates

Change: Added E3N-VMX100, EAB-VMX100-3Y and EAB-VMX100-5Y.

 

Device Uptime

Change: Added "Requirements and limitations" for Access Points.

 

Configuring SAML SSO with Azure AD

Change: Added section "Testing the SSO Configuration".

0 Replies 0
Get notified when there are additional replies to this discussion.