Documentation Digest: December 24th - February 24th

Meraki Employee

Documentation Digest: December 24th - February 24th




Hi Community,


Below are the most important changes to our documentation between December 24th and February 24th:


How to unassign a queued license in PDL

Change: New article.


How to convert an org from Co-term to Per Device licensing

Change: New article.


MT14 High Sampling Mode

Change: New article.


MV93 Series Datasheet

MV63 Series Datasheet

Change: New articles.


Meraki Display Licensing

Meraki Display Hardware Guide

Change: New articles.


Cisco Meraki MR30H SES ESL Specifications

Cisco Meraki MR33 SES ESL Specifications

Cisco Meraki MR74 SES ESL Specifications

Cisco Meraki MR45 SES ESL Specifications

Cisco Meraki MR55 SES ESL Specifications

Cisco Meraki MR36 SES ESL Specifications

Cisco Meraki MR36H SES ESL Specifications

Cisco Meraki MR44 SES ESL Specifications

Cisco Meraki MR46 SES ESL Specifications

Cisco Meraki MR56 SES ESL Specifications

Cisco Meraki MR76 SES ESL Specifications

Cisco Meraki MR86 SES ESL Specifications

Change: New articles.


Cisco+ Secure Connect - Meraki SD-WAN Integration: Enhanced (early preview)

Change: New article.


Unidirectional Link Detection (UDLD)

Change: Added MS390.


Loop and MAC Flap Detection on MS

Change: Added note for MAC Flap Detection support on MS390.


MS390 Datasheet

Change: Added note that Meraki Support can't upgrade from Enterprise to Advanced licensing and a license upgrade must be purchased.


Approximating Maximum Clients per Access Point

Change: Added MR28 and MR78.


MR36H Installation Guide

Change: Added section about UTP jumper cable.


Manual Channel Selection, Transmit Power Adjustment, and Antenna Configuration

Transmit Power and Antenna Configuration

Change: Added note of UI behavior for single-radio MRs (MR12 and MR62). Will appear as "Off", even though not disabled.


MR28 Datasheet

MR28 Installation Guide

Change: Added note about supported power adapters.


SES-imagotag Electronic Shelf Labels (ESL) Integration with MRs

Change: Added reference to product specific SES ESL Specification KBs.


Frequently Asked Questions for Cisco Meraki Access Point Antenna

Change: Added all mounting and extension cable option SKUs.

Meraki Vision Changelog

Change: Added release notes for up to v1.7.2.


Hardware Guidelines for MV Video Wall Workstations

Change: Added section "Recommendations" and updates System Requirements.


Sensor Sight

Change: Added MV63(X), MV93(X), MT10 and MT12.


Meraki Display Introduction

Change: Changed from "Public Beta" to "Introduction".


Video Retention

Change: Added Gen 3 MVs to "Video Retention Expectations".


MV Encoding Improvements: Smart Codec

Change: Added Gen 3 MVs.


Manually Integrating Cisco Umbrella with Meraki Networks

Change: Added note to add an Umbrella DNS domain exclusion, if Walled Garden is used.


Meraki MX Security and SD-WAN Licensing

Change: Clarification on MX license edition moves.


Client VPN Overview

Change: Added note that Client VPN connections can only be established on the primary uplink.


IPv6 Support on MX Security & SD-WAN Platforms - Routing

Change: Added information about new "Routing page" as part of MX 18.1.


LLDP Support on Cisco Meraki Products

Change: Added note about MX84 sending out LLDP on VLAN 4095 in some configurations.


AnyConnect Authentication Methods

Change: Added note, that Meraki Support is currently not able to assist in Certificate-only authentication (in beta).


MG41/41E Technical Specifications

Change: Updated certified carriers.


Configuration Settings Payloads

Change: Various updates to multiple payloads.


Using the Systems Manager iOS App for Additional Functionality

Change: Added "Suggested Network Enrollment" and "Homescreen shortcuts", as well as added permission information about GPS tracking.


Systems Manager Sentry Enrollment

Change: Added "Suggested Network Enrollment".


Cisco Security Connector (CSC)

Change: General overhaul; e.g. added sections for "Per-App DNS" and "Per-App Content Filtering".


Alerts and Notifications

Change: Added MS125 to list of supported devices for critical temperature alert.



Change: General overhaul; e.g. added section "List of alerts shown on the organization alert page".


Organization Settings

Change: Added "Manage visibility of Dashboard Banners".


Two-Factor Authentication

Change: Added sections "Using Duo Mobile for Two-Factor Authentication in Dashboard" and "One-Time Backup Codes".


Using the Organization Inventory

Change: Added note about claiming devices into a "holding organization" to actually claim device ownership.


Meraki System Maintenance Overview and FAQ

Change: Added impact of System Maintenance in regard to Systems Manager.


Meraki Authentication Server Certificate Rotation - Feb 2023

Change: Added FAQ "Is there any additional precautions which can be done to keep devices online?"


Returns (RMAs), Warranties and End-of-Life Information

Change: Added note about "Regional Return Policies"; added note about what to do if RMA creation fails; added Gen 3 MVs.


Cannot Add Devices Using Cisco Meraki Order Number

Change: Added note that claiming orders using the order # does not work, if the license key has already been claimed.


Meraki Licensing - License More Devices vs Renewal

Change: Added note on how to add multiple license if required at the time of renewal.


Cisco Meraki Devices purchased Second Hand

Change: Added FAQ about vendors resell Meraki devices and warranty status for resold devices.

Kind of a big deal

You must be due a holiday after that much work.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.