Questions about NAT Mode usage

naomi-p
New here

Questions about NAT Mode usage

Hi,

 

I’m interested in setting up a guest network on my current network, and I plan on using NAT mode to do so. However, I’m a little concerned as it seems like I’m limited to only using a 10.0.0.0/8 network in this mode, and I already have devices on my network that are using this subnet. So I guess my question is twofold. First, will it be an issue to have both of these subnets co-existing on my network? And if so, is there somewhere on the dashboard where I can edit the subnet that is used in this mode?

 

Thanks!

4 REPLIES 4
Ian-V
Meraki Employee

Hi Naomi,

Good question! Yes, you can still use NAT mode even if an overlapping subnet exists on the network. Client traffic is translated to use the IP address of the access point when accessing internet resources. Therefore, it won't cause any addressing conflicts with your existing 10.0.0.0/8 network.

To answer your 2nd question, there is no way to edit which subnet is used for NAT mode. This is a fixed setting.

To learn more about NAT mode, you can check out this article from our documentation: https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/NAT_Mode_with_Meraki_DHCP

If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.

Thank you! This is the info I needed!

UCcert
Kind of a big deal

Hi @naomi-p 


Worth reading the below document:

 

https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/NAT_Mode_with_Meraki_DHCP

 

This will work fine as the client devices will get NAT’ed to the IP of the AP.

Darren O'Connor | uccert.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

Thank you, @UCcert. I'm all sorted now, thank you so much for your help!

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.