EERO Router question with multiple external IP addresses

SOLVED
CarlPer
Just browsing

EERO Router question with multiple external IP addresses

Hi,

My ISP has assigned me a block of static external IP addresses. I use one for my router, one for a cloud server, one for a database server and one for a photo server which I all host myself. My current (Draytek) router lets me assign each static external IP address to an internal (static) IP address. with an open port setup,. Can I do something similar with an EERO router? I don't want to rush out and buy a new router to discover I can't do this.

 

Thanks in advance

Carl

1 ACCEPTED SOLUTION
alemabrahao
Kind of a big deal
Kind of a big deal

I'm confused, do you have a Meraki MX on your topology?

 Here is the MX quick start:

 

https://documentation.meraki.com/MX/MX_Quick-Start

 

If you don't have a Meraki device I suggest you talk with a Meraki representative sales.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

View solution in original post

3 REPLIES 3
alemabrahao
Kind of a big deal
Kind of a big deal

I'm confused, do you have a Meraki MX on your topology?

 Here is the MX quick start:

 

https://documentation.meraki.com/MX/MX_Quick-Start

 

If you don't have a Meraki device I suggest you talk with a Meraki representative sales.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
alemabrahao
Kind of a big deal
Kind of a big deal

More documentation that can help you.

 

https://documentation.meraki.com/MX/Networks_and_Routing/Configuring_VLANs_on_the_MX_Security_Applia...

 

https://documentation.meraki.com/MX/Networks_and_Routing/MX_Addressing_and_VLANs

 

https://documentation.meraki.com/MX/Networks_and_Routing

 

https://documentation.meraki.com/MX/Networks_and_Routing/MX_Routing_Behavior

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
Jonathan-S
Meraki Employee
Meraki Employee

In addition to the resources that alemabrahao posted above, if we are working with the Meraki MX platform here, be sure to reference the "1:1 NAT" section of the following resource to give you a better understanding of the available offerings on the MX platform and to help you achieve what you are looking to do:

 

https://documentation.meraki.com/MX/NAT_and_Port_Forwarding/Port_Forwarding_and_NAT_Rules_on_the_MX

If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.