monitor VPN using SNMP?

[ASL_Hull]

Is is possible to monitor the status of a VPN configured on a Meraki device using SNMP?  If so, could anyone point to any useful resources, I found some snmp overview / configuration documents but nothing covers the VPN section

Thanks in advance

[MerakiDave]

Dashboard does have a native notification alert for VPN connectivity status changes (Network Wide > Configure > Alerts) any time a site-to-site VPN link goes down or back up.  You should be able to get at this info via SNMP.  Check here https://sourceforge.net/p/netdisco/mibs/ci/55fcb1db6c981dacd2ce3bc6a71143fec0149afb/tree/meraki/MERA... I haven't tried it myself but have a look at vpnConnectivityChange and vpnFailoverDetected.

[ASL_Hull]

Thank you, I'll take a look

[PhilipDAth]

Meraki and SNMP are only for sadists.  Don't go there unless you enjoy pain.

[PhilipDAth]

Make that a masochist.