Packet capture

Dandri
Here to help

Packet capture

Hello i´m playing with packet capture on my MR18 to try to see the traffic from a meraki NAT/DHCP network to my router. The problem i´m having is that i can not see the traffic from between my L3 switch to my router.

 

Setup is like this: Router > L3 Switch >  Switch > MR18

 

 

 

 

6 Replies 6
ww
Kind of a big deal
Kind of a big deal

did you select the wired interface?

cant you start the trace on the l3 switch or router?

Dandri
Here to help

I selected the wired interface.

I recon i will just plug in to the router and try it from there yeah
PhilipDAth
Kind of a big deal
Kind of a big deal

You are using the SSID option where the SSID is configured to use NAT?

 

If so, the MR18 processes the DHCP traffic, not your router.

Yes i am using the Meraki NAT option.

I am essentially trying to see the internet traffic that passes from between the MR18 and my router.

PhilipDAth
Kind of a big deal
Kind of a big deal

 

@ww should be right, you should be able to do a packet capture on the wired interface of the MR18. Note that because the traffic has already been NATed you'll only see traffic to and from the MR18 IP address.

 

ahh i see, i was interested in finding out if i could see how they NATed between the devices.

Thank you
Get notified when there are additional replies to this discussion.