LAN devices lockup every 30 seconds for 15 seconds

RTIJohn
New here

LAN devices lockup every 30 seconds for 15 seconds

LAN devices lockup every 30 seconds for 15 seconds, with or without Internet. We swap out the Meraki with an off the shelf Nighthawk router and no lockups. Not sure what else to try. Thanks.

4 Replies 4
ww
Kind of a big deal
Kind of a big deal

Do you have a design what hardware you use and how all is connected? 

 

Is your lan running spanning tree? And how is that configured

RTIJohn
New here

It's an Audio Video server with a Static IP, such as https://www.rticontrol.com/xp-8v-control-processor.html

 

The NW person won't give up what the settings are, unfortunately.

BlakeRichardson
Kind of a big deal
Kind of a big deal

I assume you are using an MX product. How many devices are running through this and has the right size appliance being used?  Video uses large amounts of bandwidth and if you haven't scoped the right size MX you are going to run into bottlenecks. 

If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.
RTIJohn
New here

Thank you. It's only a few Static IP devices. No Video over IP traffic, and mostly IR and serial commands.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.