Full-stack NBAR support - Validation logic

DarrenOC
Kind of a big deal
Kind of a big deal

Full-stack NBAR support - Validation logic

Not able to respond to posts within the Feature Announcements sections so following up here. Its worth paying attention to the document that was posted by @AI007  especially around NBAR Validation logic.

 

https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Network-Based_Applica...

 

NBAR will only work in wifi Networks where all AP's are Wifi6 enabled - you can't mix and match.  Likewise with a full-stack/combined network.  You also can't have a supported MX running 16.4 and mixed Wifi6 and none Wifi6 AP's as again the validation logic will fail and NBAR won't be enabled.

 

 
 
Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
0 Replies 0
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.