A new candidate appliance firmware version is available. Firmware MX 18.107 was just released on 2023-04-12 and has been in this firmware category since 2023-04-29.
Due to an MX 15 regression, the management port on MX84 appliances does not provide access to the local status page
MX appliances will now properly validate that DBD packets conform to the appropriate MTU size. If the MX’s OSPF peer has an improper MTU configured, it may cause the OSPF adjacency to fail to properly form. The updated behavior properly conforms to RFC. Please ensure these settings are properly configured on any MX’s OSPF peers to avoid disruption after upgrading to MX 18.1.X.
Due to an MX 17 regression, RADIUS messages that transit across AutoVPN may fail to be routed correctly.
There may be an increased risk of encountering device stability and performance issues.
OTHER
Due to its limited value as a troubleshooting tool, the speed testing tool has been removed from the local status page.
Made the content filtering system more aware of system state issues (such as system time not having been set through NTP yet) that would cause content filtering lookup requests to fail. This may make web traffic more responsive in certain edge-case situations.
Secure Group Tags (SGT) will now be supported on Z3(C), MX64(W), MX65(W), MX67(C,W), MX68(W,CW), MX75, MX85, MX95, MX100, MX250, and MX450 appliances.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
