Wrong formulae in Auto VPN Hub Deployment Recommendations documentation

Solved
Sune
Conversationalist

Wrong formulae in Auto VPN Hub Deployment Recommendations documentation

The documented formulae seems to be incorrect for "Hub and Spoke - Hub Tunnel Count" in the Auto VPN Hub Deployment Recommendations - Cisco Meraki Documentation

the shown formula: ((H−1)∗L_H^2 )∗(S∗L_H∗L_S ) this is incorrect and give an output of 4.800.

The correct formulae should be: ((H−1)∗L_H^2 )+(S∗L_H∗L_S) This formulae gives the same result that is given in the description to the formulae, which is 412.


New to learning here, let me know if this isnt the kind of feedback this place is for 😄

EDIT: Fixed my typo with the formulae

1 Accepted Solution
Ryan_Miles
Meraki Employee
Meraki Employee

I also submitted the doc feedback internally

Ryan

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.

View solution in original post

3 Replies 3
KarstenI
Kind of a big deal
Kind of a big deal

Good catch! The last part of the formula is correct on the page with L_H*L_S, but the "*"  is incorrect in the formula. This is the right place to report this.

 

Happy learning!

If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.
Sune
Conversationalist

Oh yea the double L_H was a typo of my own 😄

Ryan_Miles
Meraki Employee
Meraki Employee

I also submitted the doc feedback internally

Ryan

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
Get notified when there are additional replies to this discussion.