the following document states in the Port Mapping for different MX models section that (e.g. MX85's first LAN port is physically labeled "5". It maps to LAN 3 on dashboard template.
However, Looking closely at the intersection of "LAN 3" under "Dashboard Template Labels" and the "MX85" column under "Physical Port Labels" in the table, the value is 3, not 5.
Therefore, based on the table, it appears that for the MX85, the physical port labeled "3" maps to "LAN 3" on dashboard templates.
Given the text states: "(e.g. MX85's first LAN port is physically labeled "5". It maps to LAN 3 on dashboard templates.)", and the table shows "3" for LAN 3 on MX85, there does seem to be a discrepancy between the example text and the table for the MX85. so I think the table need updating so the intersection is 5 ?
https://documentation.meraki.com/MX/Other_Topics/MX_Cold_Swap_Replacing_an_Existing_MX_with_a_Differ...
