Hyperlink correction - Device Utilization

Solved
RaphaelL
Kind of a big deal
Kind of a big deal

Hyperlink correction - Device Utilization

Hi ,

 

https://documentation.meraki.com/MX/Monitoring_and_Reporting/Device_Utilization

MX device utilization can be retrieved using the API as well. The data reported to the dashboard and via the API are based on a load average taken every 60 seconds. The load value is returned in numeric value ranging from 1 through 100. A lower value indicates a lower load, where a higher value indicates a more intense workload. Currently, the load value is calculated based upon the CPU utilization of the MX and its traffic load. 

 

The hyperlink  "using the API" is no longer valid ( API v0 instead of v1 ). It should redirect to : https://developer.cisco.com/meraki/api-v1/get-device-appliance-performance/

 

Cheers ! 🙂

1 Accepted Solution
Ryan_Miles
Meraki Employee
Meraki Employee

Thanks for catching it. I fixed it.

Ryan

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.

View solution in original post

1 Reply 1
Ryan_Miles
Meraki Employee
Meraki Employee

Thanks for catching it. I fixed it.

Ryan

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.