Hello Guru's,
I have been trying to add 50+ AP’s using Bulk network creator tool. Below are config setting before uploading .csv file:
- Source Configuration
- Copy Settings from: Site Name
- CSV Import: Uploaded Attached file
Hit Create Network
After successful creation of network and AP’s, below is the outcome of LAN IP.
| Network name | Serial | Network tags | Name | Tags | Address | Notes | Type | Static IP | Netmask | Gateway | DNS1 | DNS2 | VLAN |
| New Building | x.x.x.x | AP001 | Static IP | 10.52.41.141 | 255.255.255.128 | 10.52.41.250 | 10.52.41.250 | ||||||
| New Building | x.x.x.x | AP002 | Static IP | 10.52.41.142 | 255.255.255.128 | 10.52.41.250 | 10.52.41.250 |
Though IP is mentioned under Static IP column, but yet it's not being assigned to AP.
Can any one please advise how to resolve the problem Or If it can be done via API? If yes, Can I get a script please.
Thanks in advance.
