Assistance Required for Using UniFi Captive Portal with Meraki

[ITSolutions]

Meraki clients are redirected to the UniFi portal, but the captive portal page does not load properly.

So far, I have confirmed that routing and connectivity between the Meraki network and the UniFi Controller are working fine. However, the landing/voucher page from UniFi does not appear when guests connect.

Could you please guide me on the correct configuration steps or any specific requirements (such as HTTPS redirection, firewall rules, or IP whitelisting) that I need to apply in Meraki to make the UniFi captive portal

[alemabrahao]

Okay, just to confirm, you're using Meraki APs, right?

You need to enable everything related to the Unifi Portal on Walled Gerden.

Also, try disabling the device's random MAC address.

https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Walled_Garden

[PhilipDAth]

Did you know that Meraki WiFi has a built in coupon system?

https://documentation.meraki.com/MR/MR_Splash_Page/Configuring_a_Prepaid_Card_Billing_SSID

The most common deployment I do is the "fast pre-paid", because it doesn't require the billing engine.  You can use coupon codes without needing anything else.

https://documentation.meraki.com/MR/MR_Splash_Page/Customizing_Splash_Pages_for_Fast_Prepaid_Card_Bi...