APi that provides configured uplink bandwidth on wan1 or wan2 or ceullular interfaces

CiscoLumen
Here to help

APi that provides configured uplink bandwidth on wan1 or wan2 or ceullular interfaces

looking for an api that proivdes the configured/provisioned bandwidth on uplink wan1 or wan2 or cellular interfaces.

 

not the limit bandwidth api : /networks/{networkId}/appliance/trafficShaping/uplinkBandwidth

3 Replies 3
Badr-eddine
Getting noticed

Hello,
 
After conducting thorough research, I have discovered an additional API call that retrieves uplink configurations of an MX device. This particular call can be made using the endpoint.

 

/devices/{serial}/appliance/uplinks/settings

 

However, I noticed that the response from this call does not include the provisioned bandwidth settings. It appears that the provisioned bandwidth might be a fixed value depending on the interface type. For example, in the case of an MX67 device, all of its interfaces are RJ45 ports, allowing them to achieve a maximum bandwidth of 1G.

 

RaphaelL
Kind of a big deal
Kind of a big deal

 

Just a little FYI ,most MX won't reach the interface speed anyway.

 

MX68 = rated to max 750Mbps without any sec features. 

Absolutely, interface bandwidth cannot exceed the maximum throughput of the MX

Get notified when there are additional replies to this discussion.