APi that provides configured uplink bandwidth on wan1 or wan2 or ceullular interfaces

[CiscoLumen]

looking for an api that proivdes the configured/provisioned bandwidth on uplink wan1 or wan2 or cellular interfaces.

not the limit bandwidth api : /networks/{networkId}/appliance/trafficShaping/uplinkBandwidth

[Badr-eddine]

Hello,

After conducting thorough research, I have discovered an additional API call that retrieves uplink configurations of an MX device. This particular call can be made using the endpoint.

/devices/{serial}/appliance/uplinks/settings

However, I noticed that the response from this call does not include the provisioned bandwidth settings. It appears that the provisioned bandwidth might be a fixed value depending on the interface type. For example, in the case of an MX67 device, all of its interfaces are RJ45 ports, allowing them to achieve a maximum bandwidth of 1G.

[RaphaelL]

Just a little FYI ,most MX won't reach the interface speed anyway.

MX68 = rated to max 750Mbps without any sec features. 

[Badr-eddine]

Absolutely, interface bandwidth cannot exceed the maximum throughput of the MX