VLAN Profiles supported (MR36s, MR46s, and MR56s - and perhaps other models)

[RWelch]

In doing some preliminary research on VLAN Profiles , the document last updated Jun 6, 2025, indicate VLAN profiles are supported on the following platforms and firmware versions under the Requirements, guidelines and limitations section:

MR20/30H/33/42/42E/52/53E/70/74/84

Curious if MR36s, MR46s and MR56s should also be included (perhaps just not documented accordingly)?

I’ve not yet enabled or tested anything - just doing some preliminary research for a possible solution.

[Ryan_Miles · Accepted solution]

I assume the doc is out of date and should include all the recent APs. I also assume the switch models need an update too for recent models like MS150.

I use VLAN profiles on my MR44's, 46's, and 56's here.

Will update thread once confirmed and doc is updated.

[RWelch]

Worked for me as well after testing - seems like the models/documents need refreshed to reflect such. 

Thanks for the response.

[RWelch]

Maybe I should have categorized the post under Documentation Feedback?