How to add Meraki Dashboard to Prime Infrastructure using SNMP ?

[ANarcis]

When Adding the Dashboard to Prime Infrastructure 3.1.0 via SNMP , do I use the public ip address of Security Appliance or DNS Name ?

[BrechtSchamp]

I noticed that in this guide they query the dashboard via SNMP instead of the devices directly, so then the answer is neither... :

https://documentation.meraki.com/zGeneral_Administration/Other_Topics/Cisco_Prime_Infrastructure_Int...

That said, you can indeed also query the devices via SNMP. The access credentials of the two are configured in different locations. More info here:

https://documentation.meraki.com/zGeneral_Administration/Monitoring_and_Reporting/SNMP_Overview_and_...

I'm not sure if PI will allow hostnames to be used. It isn't specified in the docs:

https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-1/administrator/guide/PIAdminB...

In any case you would then also be depending on DNS to be functional for your monitoring, this may not be desirable.