cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Discovery of Meraki Devices in SCOM / Support system mib-II

Highlighted
New here

Discovery of Meraki Devices in SCOM / Support system mib-II

Are there any plans to fully support the OID's required to allow devices to be discovered in SCOM?

 

Currently discovery fails using SNMP and according to other posts, it is because Meraki does not support all OID's in the MIB-II system such as:

 

.1.3.6.1.2.1.1.1

.1.3.6.1.2.1.1.2

.1.3.6.1.2.1.1.3

.1.3.6.1.2.1.1.4

.1.3.6.1.2.1.1.5

.1.3.6.1.2.1.1.6

.1.3.6.1.2.1.1.7

2 REPLIES 2
Highlighted
Kind of a big deal
Kind of a big deal

Re: Discovery of Meraki Devices in SCOM / Support system mib-II

@AndyP it has been previously noted in the community that there are no plans for enhancing the current SNMP functionality as the APIs are the preferred method of managing and monitoring Meraki equipment outside of the dashboard.

 

I'd make a wish though as you may get lucky.

Highlighted
New here

Re: Discovery of Meraki Devices in SCOM / Support system mib-II

Thanks for the reply.

 

Yeah, kind of frustrating that given most monitoring solutions communicate via snmp that such support of a basic standard MIB is deliberately not supported in order to force people in to using the Meraki monitoring product.

 

I just hope that Cisco do not do this with all of their other network devices

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.