vMX azure route problem

[Abechara]

hello, 

i have  an environnent auto vpn between meraki mx, i added vMX on Azure cloud i followed the steps here 

https://documentation.meraki.com/MX/MX_Installation_Guides/vMX_Setup_Guide_for_Microsoft_Azure

i configured all, vMX(HUB) can ping inside azure subnets but the users behind another Mx (HUB) cannot reach the Azure subnets, can reach only internal vMX ip 192.168.128.1/24

azure vnet is 10.1.0.0/20

azure subnets 10.1.1.0/24

                         10.1.2.0/24 

i created route table as mentioned in meraki documentation but still same problem cannot reach azure behind mx and i am sure it is a routing problem

[alemabrahao]

Ensure that the Network Security Groups and any Azure firewalls are configured to allow traffic between the subnets and from the on-premises network.

[Abechara]

firewall allow all and nsg also 

[GreenMan]

A bit of guesswork to help further without Dashboard visibility - did you raise a case with Meraki Support?

[Abechara]

no i am trying the solve it i didnt raise it with meraki support as it may be from azure

[PhilipDAth · Accepted solution]

Do the Azure routes appear in the Meraki routing table?

If not, make sure you add them under Site-to-Site VPN, under VPN Settings, Local Networks.

[Abechara]

no and that is the problem how can they appear? we cannot add them manually in site to site

[Abechara]

what i did i used the same subnet in azure in the internal ip of vMX and i did static route so it overlaps but it worked

[Hal9K]

Are your Azure route Tables for the Azure VNETs/subnets pointing to the Meraki virtual appliance with the routes beyond the Meraki vmX ?