Some of devices for the l2-linklayer in topology page didn't show.

Thiandanai
Conversationalist

Some of devices for the l2-linklayer in topology page didn't show.

I'm absolutely sure those devices that didn't show on the topology page are online and show cdp/lldp neighbor correct. Please help me to solve this case. 

2 Replies 2
PhilipDAth
Kind of a big deal
Kind of a big deal

I don't understand the problem you are describing.

 

Can you elaborate?

I saw the problem on my topology page.
 
I expect to see entire my network, i mean all of my devices (all switches and APs).
 
But for some devices, it disappears from the topology page. then i check on the switch port, the point that these devices disappear, all of these run cdp/lldp normally and i can see these devices connect with switch port normally.
 
Even so, on topology page still not show these devices.
 
 
 
P.S. disappear devices are C9300-48UN, CW9164I
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.