Meraki

Irin04 · ‎Jul 10 2023

Sorry for the confusion! Other swictes are not meraki. those are PoE smart switch. I didn't mention i did all the switches to trunk ports native VLAN 1. In swicth 3 it's not directly connected to meraki. It connects to Switch 2. But i separately created VLAN 2 and 3 in both switch. About to change port access port, I changed switch 3 G7 interface to access port which i want to use a device by using ethernet cable. I didn't change anything switch 2. I am confused about changing access port in switch 2. Do i need to specify a specific port for that vlan and connect that port to switch 3? Thank You! irin

Irin04 · ‎Jul 10 2023

Thank you for replying! No! there no ACL setup.

Irin04 · ‎Jul 10 2023

Hi Everyone, I am having issue for setting up a device with vlan. Here is my switch setup: One switch is cisco meraki that switch (main switch) is in 192.168.1.0/24 . I created Vlan 2 and 3 in that switch. Main switch is connected to another switch which is in 192.168.2.0/24. Thrid swicth is connected to second switch which is in 192.168.2.0/24.In frist switch an interface G24 i setup native vlan 2 and trunk that port also allowed all vlan. In thrid switch an interface G7 setup Vlan 3 and trunk also allowed all vlan. Now as my setup it can identify network but can not ping when i connec any device in thrid switch by using ethernet cable. Any suggestion! Thank You! Irin

Irin04 · ‎May 9 2023

Hi, I setup a create VLAN which is working fine. BUt when i tried to connect polycom VOIP phone NTP server is not syncing. For laptop time it's okay. It's happing only for phone. Please suggest me what am i missing? Thank YOu! Irin

Meraki

Community

About Irin04

Irin04

Community Record

Re: Ping not working for Vlan IP

Re: Ping not working for Vlan IP

Ping not working for Vlan IP

NTP SERVER SYNC ISSUE FOR VOIP