Meraki

Community

About RGN

Re: MX84 WAN2 setup

by in New Meraki Users
‎Feb 13 2024 9:31 PM
‎Feb 13 2024 9:31 PM
Summary on my results: From ISP into an unmanaged switch. From the unmanaged switch, one patch cable to WAN1, second patch cable to WAN2 on Meraki. Each WAN with a static IP provided by ISP. Designated a specific VLAN for WAN2 by way of traffic flow rules.   Thank you all for the help and advice!  ... View more

Re: MX84 WAN2 setup

by in New Meraki Users
‎Oct 31 2023 8:37 AM
‎Oct 31 2023 8:37 AM
Thank you, will share feedback later on.   ... View more

Re: MX84 WAN2 setup

by in New Meraki Users
‎Oct 31 2023 8:24 AM
‎Oct 31 2023 8:24 AM
For sure, having a second ISP would be the key factor, but limited at the moment. Fiber from ISP, existing equipment from ISP doesn't provide an extra WAN/Internet port from their equipment. Focus is more on isolating web traffic versus having redundancy with two ISP's.   ... View more

Re: MX84 WAN2 setup

by in New Meraki Users
‎Oct 31 2023 8:15 AM
‎Oct 31 2023 8:15 AM
Thank you for the info. Using the link provided by @alemabrahao my layout looks like this:   I only have path going in and out provided by ISP. Still doable???     ... View more

MX84 WAN2 setup

by in New Meraki Users
‎Oct 30 2023 8:30 PM
‎Oct 30 2023 8:30 PM
I have an MX84. ISP has provided multiple static public IP addresses. I have WAN1 connected to the modem/gateway from ISP. All traffic bypasses modem/gateway, into MX85 through WAN1. Is it possible to configure WAN2 with a second static public IP and have specific clients flow through WAN2? The goal is the following: 3rd party compliance vendor wants to isolate specific web traffic.   Thanks! ... View more
© 2025 Cisco Systems, Inc.