Hi guys, I've a situation here for one of our customers site. The situation is like this.   sites situation: HQ (1 MX84 and 1 MS120) and 8 Branches (each has 1 MX68 and 1 MS120) with each sites using ip subnet in 172.16.X.X range. All sites is in mesh vpn to each other.   HQ MX is in routed mode (multiple vlans interface configured on MX) due to only using layer2 switch (MS120)   HQ MX have non-meraki-vpn connection to AWS cloud for user servers (remote subnet 10.0.0.0/8). I need to configure so that branches can reach AWS cloud through HQ MX.   I've read on documentation, "Please note if MX devices in Routed mode only support OSPF on firmware versions 13.4+, with VLANs disabled. OSPF is otherwise supported when the MX is in passthrough mode on any available firmware version. This can be set under Security & SD-WAN > Configure > Addressing & VLANs. "   How can i advertise remote subnet 10.0.0.0/8 to branches because I cant enable OSPF here at HQ MX due restriction above? I cant disable the vlans there at HQ. Was there other alternative method to make sure branches can reach AWS cloud servers through HQ MX.   Thanks in advance.     ... View more

Hi guys, have you ever experience the device that automatically and comes back online after 3 minutes. I suspect it was due to high temperature as the server rack is full with other equipments and stacked closely to each other. I have a few questions about this   1) How do we check or monitor the device temperature? 2) What is the threshold or the exact number of the device temperature which have been set, to trigger the device for an automatic shutdown?   3) Is there are any other options that have been configured for an automatic shutdown such as high RAM or CPU utilization?   Thanks ... View more