Hi guys,   Do you use Auto or Manual under 5 GHZ radio settings?  We have things set at 20 and 40 for various networks, but I am interested in A.I. ing as much of our network as possible.  Especially as things improve with A.I. features on the Meraki side. ... View more

Hello   We moved our MR 46 access points to 30.6 to solve a major issue where the rates were not being broadcast in probe response packets.  Restarting the APs would fix them for a while, but suddenly they would stop taking Chromebook clients again and require another reset.  30.6 was put forth as a solution to this issue by Meraki support and seems to have done that.   The problem is that it seems to have introduced other issues.  One issue is persistent low level authentication failure for Chromebooks, which have a managed SSID password that is encoded through the Google Admin Console.  Another issue is medium to high packet loss on a lot of the access points.  Prior to upgrade these access points were reporting low packet loss.    We have another network that we have left on 29.7.1 that does not seem to have these issues.   Anyone else having those issues.   I feel like there may be some major firmware bugs in the 30.6 release. ... View more

Hello   I am having a very frustrating problem.  Everyone once in a while - maybe daily web browsing will stop working on my laptop and I will be unable to ping my default gateway(timeout).  At the same time if I am on a zoom or in a remote desktop session neither of these will stop working.   If I run a ping -t everything will return to normal after about a minute or two(to me it seems to be the time that it would take for a access point to restart).  There is no indication that anything is wrong at all in the dashboard.  In fact it says everything looks perfect.   Anyone else experience this?  We are using MR46s. ... View more

We have found this update to be good, but we are having one issue.  One of our windows laptop models running a realtek adaptar  and a couple other devices like android started having issues after upgrading to the release candidate.  Normally our laptops have 15 or less connections in a 24 hour period.  After the update this number soared into the 1000s on one particular device type which we have around 100 or so devices deployed.  This included devices disconnecting and reconnecting to the same AP over and over in a matter of a couple seconds.  This lead to lagging and issues with Zoom clients especially.  Anyone else run into this?     I mean you can even see that that is down 50% from yesterday.  That means yesterday this laptop had 500 connections.  All that worked fine, but just disconnecting and reconnecting over and over.   This was not an issue before the 28.6 firmware.  ... View more