Community Record
18
Posts
4
Kudos
0
Solutions
Badges
Sep 11 2024
12:26 AM
Hi, I have a question regarding MS1XX switches and POE usage. In this case we have lot of POE AP's and POE cameras connected to a switch. What will happen with the switch when it reach the limit of 370w? Will it reboot or shutdown ports?
... View more
Feb 15 2024
10:15 PM
We have the the same issue, all sites with an MG is yellow in the dashboard but the MG it self is green on the site. Have you got any solution?
... View more
Feb 15 2024
10:13 PM
We have the same issue, all sites with a MG is Yellow but the MG it self is green and up and running. Have you still the same issue 4 years later? 🙂
... View more
Nov 23 2022
3:58 AM
Hi, what is the best practice in this scenario? SD-WAN MX85 Connect all 5 MS switches directly to the MX or just connect the first switch to the MX and then link the other MS to the (first MS) that are connected to the MX?
... View more
Oct 21 2022
2:27 AM
They are now online in the dashboard. It took about 2,5 hours before the showed up as online in the dashboard. Normally it takes about 5 min,
... View more
Oct 21 2022
12:25 AM
Hi, we have connected hardware MS120 and some MR44 to a site network today around 08AM. They have still not reported to the dashboard. Is there some problem?
... View more
Can you define what Android OS version had this issue?
... View more
Mar 23 2022
1:09 AM
4 Kudos
Hi all, we have started getting problem from all different sites with AP's dropping of network (or loose connection) since around 3-4AM this morning. I'm not sure if its our firewall or just the connection to Meraki cloud or if Cisco has problem? Have you notice anything? [Update 09:35] Got this link: https://community.meraki.com/t5/Meraki-Service-Notices/bg-p/service-notices [Update 12:45] Still not solved. We're having lot of connection problems between AP/MX and Cloud.
... View more
I would recommend upgrading. We're running 28.6 on ~360 AP's with WPA2 PSK on one SSID and Radius on another. We have no issues with this.
... View more
We have MR44 / MR76 and we also see this notifications. Running on fw 28.6. @Mark_B7 are you running local internet breakout with sd wan or mpls or is the DHCP on the same LAN? Example: Client made a request to the DHCP server, but it did not respond.request_ip='unknown' request_server='unknown' details='no_dhcp_ack' roam_ap='FE:9E:28:FF:E1:B0' radio='0' vap='1' channel='6' rssi='32'
... View more
Mar 1 2022
4:37 AM
Hi all, could you please share what "Target power dbm" you use in your enviroment? I'm using 7-21 on both indoor / outdoor profile. Is it set to high? I can see that some of the AP is maxing at 21 and other is running in lower transmit power.
... View more
I have seen lot of this on our hand held terminals running Android. They are connected to a SSID with a static password (WPA2) I would be happy if anyone know what can cause this issue? The devices are in lockdown mode so there is no wrong password set by user for example:
... View more
I cannot say we have han any issue. We're running with Intel WIFI6 AX201 on our Windows laptops. From what I have seen I can see a client roaming between two AP's every min. But, no disassociation and no disconnections. I'm note sure why this occurs. The signal is good to both AP's. I will try with this: Client balancing = Disable Enable band steering = On
... View more
Feb 4 2022
12:57 AM
May I ask if you have this ON or OFF in your enviroment. We're running it ON and I think we might be experiencing issues with this feature. Please let me know if you use it or not.
... View more
So it would be totally safe to update the firmware to a stable release candidate version ?
... View more
Hi, do you know when it will be published as an Stable version? We have an policy to not enroll release candidate versions...
... View more