Meraki Community

Thierno · ‎Sep 24 2021

Hello, I was using 15.43 when I encountered the problem. It is by downgrading to 15.42.1 that I was able to solve the problem. But now, on the Meraki dashboard, I can't find this version anymore. If I understood correctly, as 15.42.1 was the last stable version and today they are on version 15.44. I think you can use this one

Thierno · ‎Jul 26 2021

Hello, So good news, after opening a ticket, I was suggested to put the 15.42.1 version (I was told that it is a known problem on the versions I was using). Since then, no more packet loss on remote sites. Thanks @PhilipDAth and @ww

Thierno · ‎Jul 25 2021

Thanks in advance PhilipDAth Yes, no problem there too. I tried two types of architecture (the MX are directly connected to a firewall (Fortinet). The loss is really felt when at the remote site.

Thierno · ‎Jul 24 2021

Thanks in advance, Yes I use a VIP. When you are in Passthrough or VPN Concentrator mode, the deployment mode of the warm spare is only done in VIP unlike the routed mode where you have the two choices "use virtual uplink IPs" or "Use MX uplink IPs".

Thierno · ‎Jul 24 2021

Hello Daniel, When a template is linked to a site of an organization, the existing configuration before is overwritten to make room for the configuration pushed by the template. However, when a site is linked to a template, you can modify its configuration without impacting the whole site but the problem is that when you make modifications on the template, once again the existing configuration will be overwritten by it if there is a difference.

Thierno · ‎Jul 24 2021

Hello everyone, I encounter a malfunction that I can't solve, if someone could help me. Indeed, I implement a Meraki SD-WAN solution whose architecture is as follows: Main site: 2* MX250 in HA which are in VPN Concentrator mode Remote sites: in routed mode (Full-tunnel) The problem: On the remote sites, I have important packet losses (about 30%) when I make a request (ping) to 8.8.8.8 for example or on an IP located on the Main site. When I stop one of the two MX250 so I cut the HA of the main site or I put the remote site in split-tunnel, I have no more packet loss on the remote sites. Actions taken: I changed version to 15.43 and tried even the last ones in beta (16.9 and 16.10) but nothing to do. Thanks for your help

Meraki Community

About Thierno

Thierno

Community Record

Badges

Re: Packet loss on the remote site (full-tunnel) when the main site is in H...

Re: Packet loss on the remote site (full-tunnel) when the main site is in H...

Re: Packet loss on the remote site (full-tunnel) when the main site is in H...

Re: Packet loss on the remote site (full-tunnel) when the main site is in H...

Re: Unique VLAN configuration in multiple templates

Packet loss on the remote site (full-tunnel) when the main site is in HA (V...

Re: Packet loss on the remote site (full-tunnel) when the main site is in H...

Re: Packet loss on the remote site (full-tunnel) when the main site is in H...

Re: Packet loss on the remote site (full-tunnel) when the main site is in H...