UDPATE: this contest has ended. Huge thanks to everyone who updated and submitted their new avatars — we thoroughly enjoyed all of your interesting submissions! Congrats to our randomly selected sock winners: @Michael_Venema and @SMontgomery.
... View more
no, scratch my previous update, Meraki does not play nice with non-meraki equipment, you have no control over LLDP on Meraki equipment unlike a less sophisticated Netgear Pro device???
... View more
Thanks, I managed to figure out how to remove the device from apple DEP and then re-prepared the device with Apple Configurator 2. Device is functioning as expected now.
... View more
Then you will need to connect the device to Apple Configurator 2 and enter DFU mode and reset the device through AC 2 If you need infos how to enter DFU mode follow the link https://www.imore.com/how-to-iphone-ipad-dfu-mode
... View more
@Christian_Lopez - well spotted! But this isn’t the post he was hiding in - he was hiding in a post in Product and Technology Discussions.
... View more
I've deployed both Meraki and Cradlepoint. Cradlepoint is going to hold up much better. The IBR1100 is shock, dust, vibration proof. Takes DC power (12-36v) has GPIO options to shutdown after x amount of time so battery doesn't drain out. I love Meraki, but if you want a Bullitt proof solution for mobile fleets, you go with Cradlepoint. Now, if I could just get the Cradlepoint to act as a VPN peer to our MX at the office.
... View more
Here are the answers your helpful questions. Thank you for your response did you also try antoher wall outlet to exclude the internal-building-cable?. Not Yet does the cable test on the meraki page shows ok? Yes and what lenght? 42M did you change the default mtu size under switch > switch settings? No are you able to ping with this command?: ping www.meraki.com -l 1472 -f Yes what is the mtu size of your clients network adapter?: netsh interface ipv4 show subinterfaces 1500 when you plug another pc in that outlet is it working fine? Yes
... View more
My lessons learned from replacing MX's so far. 1. You can add them as a secondary warm spare device in the current network. It won't take an additional license and you can plug it into any internet connection so it can get its initial config. 2. If you are going to be replacing an existing device make sure to setup any static IP information on the new MX. That information won't transfer over. 3. When ready you should be able to move all connections from the old MX to the new MX in a 1:1 fashion. 4. After the new MX is online you can remove the old MX. The only other things you may have to configure on thew new MX is the device name, address/location, tags etc...
... View more
Just received an email from Meraki stating they do not have diagnostic software for hardware. They recommended calling in to support and reviewing the device with me. Thanks for all the input here.
... View more
//
//
LITHIUM.InformationBox({"updateFeedbackEvent":"LITHIUM:updateAjaxFeedback","componentSelector":"#informationbox_6dd4d38bb96bef","feedbackSelector":".InfoMessage"});
LITHIUM.InformationBox({"updateFeedbackEvent":"LITHIUM:updateAjaxFeedback","componentSelector":"#informationbox_6dd4d38bb96bef_0","feedbackSelector":".InfoMessage"});
LITHIUM.InformationBox({"updateFeedbackEvent":"LITHIUM:updateAjaxFeedback","componentSelector":"#informationbox_6dd4d38bb96bef_1","feedbackSelector":".InfoMessage"});
LITHIUM.InformationBox({"updateFeedbackEvent":"LITHIUM:updateAjaxFeedback","componentSelector":"#informationbox_6dd4d38bb96bef_2","feedbackSelector":".InfoMessage"});
LITHIUM.AutoComplete({"options":{"autosuggestionAvailableInstructionText":"Auto-suggestions available. Use Up and Down arrow keys to navigate.","triggerTextLength":4,"autocompleteInstructionsSelector":"#autocompleteInstructionsText_6dd4d389201d17","updateInputOnSelect":true,"loadingText":"Searching...","emptyText":"No Matches","successText":"Results:","defaultText":"Enter a search word","autosuggestionUnavailableInstructionText":"No suggestions available","disabled":false,"footerContent":[{"scripts":"\n\n;(function($){LITHIUM.Link=function(params){var $doc=$(document);function handler(event){var $link=$(this);var token=$link.data('lia-action-token');if($link.data('lia-ajax')!==true&&token!==undefined){if(event.isPropagationStopped()===false&&event.isImmediatePropagationStopped()===false&&event.isDefaultPrevented()===false){event.stop();var $form=$('