Community Record
6
Posts
1
Kudos
0
Solutions
Badges
Jul 31 2024
2:45 PM
The statement of "a few weeks" went by pretty fast. Looks like it is cleared up on my networks.
... View more
Jul 30 2024
7:37 AM
1 Kudo
I heard back from Support late last night again. we have a known bug with the bandwidth limit for the SSID in Firewall and traffic shaping cannot be set to higher than 100Mbps. Our Dev team is working to resolve this issue from the backend and this could take a few weeks for this to be resolved. They went on to add - There is a workaround at the moment, by going to Traffic shaping rules > Select the bandwidth > detail then type in 0 > Save the settings. After change saved, the bandwidth on the dashboard will still showing 100Mbps but from the backend, the AP will set the bandwidth to unlimited. So, there it is. For my networks, I'm not going to go through and change anything until I hear complaints about speed. From the testing that has been done so far, it might not even be limiting at all. I will, however, need to watch the Guest SSIDs to ensure those are limiting. Thanks for all the input, guys!
... View more
Jul 29 2024
5:36 PM
I ran through a number of my networks today and noted that it is on all SSID slots. Not just 1 and 2. Has to be the dashboard. Hoping it really is just the dashboard, anyway. I have 650 networks and an API won't cut it for the guest SSID, as that varies based on the site client load and WAN speed.
... View more
Jul 29 2024
5:11 PM
Yes, Meraki support sent me a message last night. Here's the hilarious insight provided... As checking your network right now, I can see the MX can only have 120Mbps throughput to Meraki cloud server. From the AP, the throughput is 80-90 Mbps through Meraki cloud. The LAN connection can be up to 1Gbps, but if the upstream bandwidth to the Internet is 120Mbps only (as per checking the MX), you can not go faster than the limit of your Internet bandwidth in this case. I responded back with screen shots of the Throttling rule and haven't heard back yet. I have had several speed tests performed at a variety of sites. In each case the throughput is higher than 100Mbs. Which leads me to believe that the GUI is bugged or, worse yet, throttling doesn't work at all. Jury is still out
... View more
Jul 28 2024
2:32 PM
Thanks for the response, guys. Good to know I'm not crazy... least not all the time. I put a ticket in to Meraki on Friday so hopefully they have an answer soon.
... View more
Jul 28 2024
9:30 AM
Hi all. I administer a large organization with a few thousand APs ranging from MR33's to MR74's. Previous to this past Friday, the throttling of clients and SSIDs would default to Unlimited and I can adjust from there. As of Friday, all SSIDs and clients at all Networks are capped at 100Mbs. I cannot raise that unless I move to Detailed and manually enter the full wire speed. Even then, I can't tell if it is actually working. All APs are on 30.6 and I moved one site to 30.7 to test but there was no change. In the past I have caught Meraki engineers using my organization as a test bed, for which they have been told to stop. But just wondering if anyone else has seen this? For clarification, I don't care that clients are capped at 100Mbs unless I set them lower, I care about the SSID per AP being capped at 100Mbs. Thanks much!
... View more
My Top Kudoed Posts
Subject | Kudos | Views |
---|---|---|
1 | 1424 |