Meraki

Memonic · ‎Oct 20 2020

@DarrenOC well.. tryed to make a (bad) FireWall joke 🤣

Memonic · ‎Oct 20 2020

This is definitely a must have for my SockWall

Memonic · ‎Sep 30 2020

Yes it has one static for the WAN 1 and one dynamic for the cellular link

Memonic · ‎Sep 30 2020

Well… It turns out that my ISP provider did change some settings when the added the static IP address, that conflicted with my MX. The error was that the modem was replying to some requests, ICMP was one, so after some (many) hours of frustrations, I could count the MX out of the source of problem. The bad thing is now the ISP are not sure why my modem in transparent mode isn’t transparent… Thanks for your effort in helping, it gave me the fresh eyes I needed… Now I hope they can fix the modem…

Memonic · ‎Sep 29 2020

Yes it's a DSL modem. Fun part is that the VPN connection is established without any delays, issues or anything, and both through the VPN or internal the access to the server is working fine. My MX has just been updated to version MX 14.53, stated at the last one. I’ll verify the ping later, but as I remember it reply on enabling but cant remember if it is in the capture

Memonic · ‎Sep 29 2020

Tak 🙂

Memonic · ‎Sep 29 2020

It's a Sagemcom fast 3890V3 modem in bridge mode.

Memonic · ‎Sep 29 2020

Yes, but only for the VPN, seems the MX ignores 80 and 443 from external to the web-server ip.

Memonic · ‎Sep 29 2020

Ohh and I have a Z3 VPN connected and those clients can also see the web..

Memonic · ‎Sep 29 2020

Hey Meraki Community, I have some problems with external port forwarding to VLAN that seems not to be working. I have a web server running on a VLAN 5, It’s on a ESXi 7server connected direct to a MX68, connected to the internet with cabel ADSL and cell connection. The port is configured as a trunk, as is the ESXi, and the managed ESXi network is VLAN1. My internal client is on VLAN 13 and has NAT to 1, 5 and internet. Port forward to webserver:80 and 443 All traffic internal is working, but I can not see my web from outside. The packet capture does not give any hit. Any suggestions?

Memonic · ‎Sep 29 2020

I'm Henning, Danish, old in the IT-game, semi to network, and newbie in the Meraki Community, even though I’ve been using the product for several years now. Sorry 😊 My hope is to give and receive goodies from and to my knowledge.. Ohh and I started with a Cisco 1800 and a lot of fun 🙂 and now with MX68, MS220, MR42, MR18 and a Z3 just for the fun 🙂

Meraki

Community

About Memonic

Memonic

Community Record

Badges

Re: Share your feedback and snag some swag!

Re: Share your feedback and snag some swag!

Re: External Port forward to VLAN on MX68

Re: External Port forward to VLAN on MX68

Re: External Port forward to VLAN on MX68

Re: Hey Meraki Community,

Re: External Port forward to VLAN on MX68

Re: External Port forward to VLAN on MX68

Re: External Port forward to VLAN on MX68

External Port forward to VLAN on MX68

Hey Meraki Community,

Re: External Port forward to VLAN on MX68

Re: Share your feedback and snag some swag!

Re: Share your feedback and snag some swag!

Re: External Port forward to VLAN on MX68