Hello again,   in one of our networks we have configured an ssid with WPN access on all floors.   All devices are using the same VLAN, because they are all part of the same group policy.   Now I want that on one floor, all devices in the same ssid are in a different subnet (different VLAN), because on that floor there are media network devices in our LAN which they need to have access to.   Is it possible to say, if you are connected to an access point xyz, you will connect to a different VLAN than on the other access points? Then you will have access to these media devices in the same vlan?   Best ... View more

Hi everyone,   on our new site, we have two 1Gbit uplinks that I configured in a load balancing with autovpn active active. We have some strange behaviour in our network that some applications need more time than expected to connect so servers over the autovpn tunnel and sometimes they fail completely. Now we deactivated loadbalancing, these applications work again... Does anyone got the same problems or is this something I have to fix with Meraki support?   I'm thinking of enabling load balancing again and simply deactivate autovpn active active so that the apps only use one way to aws. Internet traffic is fine, it's only a problem with traffic over the autovpn...   Best ... View more

Hi everyone,   I'm just wondering what firewall rules (VPN or basic layer 3) are used when you define destinations, that are not going over the 0.0.0.0/0 default 3rd party VPN tunnel. I configured local internet breakout for the Meraki cloud connect and I'm not sure if I still have to add the Meraki ports in the VPN firewall or the firewall for internet traffic, or maybe both... Couldn't find the documentation here...    Thank you ... View more

Hi everyone,   we are using IPSK without radius and wondering, if there is a possibility to identify which device is using which key. Every user gets unique keys and when they are calling for help, it is sometime not that easy to find the device on dashboard.  It would be easier to filter on the psk they are using, to identify the device.   Am I missing that feature or is that somewhere hidden?   Thank you! ... View more

Hi everyone,   I can't find the api call to set the cellular active uplink to enable on Meraki MX. Is that hidden somewhere?   Thank you ... View more

Hi everyone,   we have an odd issue. We are testing two CW9164I, where we have clients getting 3x "Destination Host Unreachable" than pings are fine, and after a while it comes up again. So Google Meet etc is not working properly, because they have these connection errors sometimes.  On dashboard everything looks great, all green, no problems found here. The client also looks great, performance is fine (on dashboard). Same location with MR34 and MR42, no problems at all.  Any ideas what could make these losses?   Thank you     ... View more

Hi everyone,   In the past it was not possible to set the PIN of the SIM card on the MX67C-WW, but I think I read something that you don't have to delete the PIN before using anymore. Where can I set the PIN? Or am I wrong and we still have to delete the PIN first?   Best   ... View more