Fyi the problem with the getNetworkWirelessDevicesConnectionStats call has been fixed.   It's possible the latency stats call will also work now, I suggest try a test.       ...その他を表示

I'd check your actual API usage. How many other users (or applications) have API keys? You have to share the budget with those other folks in the same org. Even if your usage hasn't changed, there are likely others using API more, thus competing with your usage.   In the API docs, check Organizations > Monitor > API Requests for the two endpoints that give you this info. ...その他を表示

Well, you could get the same value, but to do that you would need to take your sample at the same time(s) that the Overview figures are calculated, I'd guess this is done daily.    But unless you happen to take a sample at the same time, the API will always get a result that is equal or greater than shown in Overview due to usage since the daily sample.   This assumes all my guesses about how it works are close enough 😊   ...その他を表示

You should know which version of the API output is being generated - It's a while since I set mine up but, when you create a post URL (destination for the output) the API version is selectable, via a dropdown. If you see only v1 or v2, I suspect you don't meet the pre-requisites for the Beta.  Beyond just having MR Access Points, this is down to firmware: Firmware R26 for WiFi observations Firmware R27.5 for BLE observations One of the major advances with v3 is that it consolidates observations to a single POST (and location) per network, rather then getting different values, at slightly different times, from different APs. This info and more is available here: https://developer.cisco.com/meraki/scanning-api/#!overview/requirements   Note that for AP models which pre-date 11AC Wave 2, r27 and subsequent firmware verions are not supported.   Some more info in this area here:   https://documentation.meraki.com/General_Administration/Firmware_Upgrades/MR_Mixed_Firmware_Networks   ...その他を表示

Hi has someone managed to solve? The exact same thing happens to me and I have not been able to solve it Regards   "Failed to validate with status code: 400, error message: Untrusted Server Certificate – Please ensure you are using a certificate signed by a valid Certificate Authority (CA)"   The certificate is issued by ZeroSSL   Regards ...その他を表示