Meraki Community

jameshottinger · ‎Jul 30 2018

hi, meraki support can definitely do this. we asked them to enable it for one of our customer sites which gives you a tickbox under network-wide settings cheers james

jameshottinger · ‎Jan 15 2018

hi all, wondering if anyone knows of a solution for bulk creation of nearly 200 user accounts as local meraki users for meraki authentication on an SSID would love to be using RADIUS but not possible in this scenario unfortunately 😞 cheers James

jameshottinger · ‎Dec 6 2017

Hi all, sorry, i haven't kept you posted on our developments....... that's mainly because we haven't had any developments! We managed to capture some wireshark data via a port mirror on one of the affected AP's that Meraki are now in possession of. From what i could see everything was running absolutely fine then stops dead. I am told this is with the Engineering Team. That's the most i have been told, and keep being told. I've been off for a few days so i haven't applied any pressure, lets see what i can squeeze out of them today! Cheers J

jameshottinger · ‎Oct 23 2017

@PacketHauler - i am actually currently on 25.6, i'll upgrade them to 25.8 right now. Thanks for pointing that out, hopefully that resolves it!

jameshottinger · ‎Oct 23 2017

Hi, has anyone ever experienced a particular model of AP mixed with other MR's going offline? We have a situation where 15x MR33's, 9x MR42's & 1x MR74 are deployed mixed in 2 buildings, with MS225's as their PoE source. Only the AP's are patched into the MS225's that have a fibre up to the edge switches. Its completely random when it happens, but all of the 15 MR33's & 1 MR74 in both buildings go offline, but PoE is still being provided. Packet captures show no traffic at all. MR42's remain online & functional. Firmware is all up to date on AP's & switches. Interested to know if anyone else has had this before? thanks James

jameshottinger · ‎Oct 23 2017

@sebastianfranco - weirdly, another AP that is receiving PoE from an HP switch is also dull. some other are bright LED's, initially when the dull LED AP's boot up, the LED is bright then dulls down once its booted.

jameshottinger · ‎Oct 23 2017

@PhilipDAth - that's what i initially thought, give it a little scrub but definitely not dirty!

jameshottinger · ‎Oct 23 2017

thats what i initially thought, give it a little scrub but definitely not dirty!

jameshottinger · ‎Oct 23 2017

@Ryan-Zimmerle - PoE via a meraki MS220, latest firmware. AP on latest firmware too

jameshottinger · ‎Oct 20 2017

Hi all, wondering if anyone has ever seen the LED on the AP's as a dull illumination. Almost hard to see. Just wondering if it means anything significant, as it happens i am experiencing issues at the site so wondering if they're related. Cheers J

jameshottinger · ‎Oct 20 2017

Hi @WadeAlsup i have found a Powershell script we can run on startup: Add-VpnConnection -AllUserConnection -Name "(vpn_name)" -ServerAddress "(vpn_address)" -TunnelType L2tp -EncryptionLevel Optional -L2tpPsk "(vpn_sharedsecret)" -AuthenticationMethod Pap -Force Thanks James

jameshottinger · ‎Oct 20 2017

Hi all, Has anyone figured a way of incorporating the VPN shared secret into a GPO containing the VPN settings to be deployed to users thanks james

Meraki Community

About jameshottinger

jameshottinger

Community Record

Badges

Re: Disable MR auto mesh function

bulk user creation

Re: MR33's going offline

Re: MR33's going offline

MR33's going offline

Re: dull LED on access point

Re: dull LED on access point

Re: dull LED on access point

Re: dull LED on access point

dull LED on access point

Re: Client VPN Group Policy deployment with shared secret

Client VPN Group Policy deployment with shared secret

Re: Client VPN Group Policy deployment with shared secret

Re: Client VPN Group Policy deployment with shared secret

Re: Disable MR auto mesh function

MR33's going offline