1 Accepted Solution
Just occurred to me that the radio TX options always show up to 30dBm even though they won't necessarily use it lol. So nevermind lol.
What channel is your 5GHz running on because that will affect its potential max tx power
Can you show a screenshot of the power level options?
Also, to be fair, you don't particularly really 'want' to go too high so you don't end up with near/far issues since most clients won't be able to hit high power outputs etc., however I understand your frustration.
Should be able to go a tad higher though
https://meraki.cisco.com/lib/pdf/meraki_datasheet_MR55.pdf
Also, to be fair, you don't particularly really 'want' to go too high so you don't end up with near/far issues since most clients won't be able to hit high power outputs etc., however I understand your frustration.
Should be able to go a tad higher though
https://meraki.cisco.com/lib/pdf/meraki_datasheet_MR55.pdf
@NolanHerring I was originally looking for about 20 or so on the 5GHz, the AP might be in the kitchen but I already have a microwave....
Here are the radio settings, as you can see I've tried an auto range and fixed:
Just occurred to me that the radio TX options always show up to 30dBm even though they won't necessarily use it lol. So nevermind lol.
What channel is your 5GHz running on because that will affect its potential max tx power
Nolan, you are a star, channel 44 in UK region couldn't go over 17db, changed to 108 and the requested 22db has taken:
