Default login for my.meraki.com not working

Solved
aluminumfoil
Here to help

Default login for my.meraki.com not working

I'm trying to access the my.meraki.com section and I'm connected to the AP. The instructions listed are:

 

The default login is the serial number (e.g. Qxxx-xxxx-xxxx), with no password. The serial number is on the bottom or back of the device.

 

I've done exactly that but it's saying I've entered incorrect login details. Nothing has been changed from defaults since I'm the owner of the device.

 

Help?

1 Accepted Solution
MRCUR
Kind of a big deal

Do you have a custom password set at Network Wide - General - Device configuration? 

MRCUR | CMNO #12

View solution in original post

6 Replies 6
MRCUR
Kind of a big deal

Do you have a custom password set at Network Wide - General - Device configuration? 

MRCUR | CMNO #12

 


@MRCUR wrote:

Do you have a custom password set at Network Wide - General - Device configuration? 


Ahhh. That worked. Thank you!

 
 

 

 

 

Device Configuration 

Thanks this worked for me too!

Pichon
New here

I have the same issue and none works. 

Sainot
Conversationalist

Do you have a custom password set in the dashboard at "Network Wide > General > Device configuration"? 

 

Like This

 

Sainot_1-1673987746547.png

 

Get notified when there are additional replies to this discussion.