Unable to see all my clients on MX100

[Ric_Uribe]

Hello,

I recently installed a MX100 on my network. The LAN portion of the MX sits on a VLAN2 and my users/clients are in another VLAN3 and there is a core switch that acts as the default gateway for the clients.

When I go to all network-wide\clients, all I see is the traffic coming from the switch, meaning all I see is the switch itself but I do not see any individual clients.  

How can I change the configuration to be able to see each device that uses the MX coming from the Switch from different VLANs?

Thank you

Ricardo U

[MarcP]

assuming the Core Switch is the dhcp server and behind your MX, thats why you won´t see the Clients and only the traffic from the Switch.

[jdsilva · Accepted solution]

Under the Addressing & VLANs page you're going to want to change the "Client Tracking" setting to IP. 

[Ric_Uribe]

Thanks guys, that worked nicely.