No alert received when secondary uplink fails on mx-95

[Smartsada007]

We have 2 up-links configured in load-balancing mode.

When primary up-link fails, we receiving alert, but surprisingly no alert received when secondary failed but primary in working.

Please guide how to get alerts when any of up-link fails?

Thanks in advance..

[ww]

https://community.meraki.com/t5/Developers-APIs/Meraki-secondary-uplink-alert-concern/m-p/100765#M40...

[MarcP]

Interessting, same "problem" as using a AGGR on switch uplinks. You only get a alert when both links went down.

In that case support also told me to make a wish.

[Smartsada007]

Means have to wait till meraki will realize that this feature to be added 🙂

[MarcP]

The more who request it, the sooner it will be added 🙂 

Already told my colluegues to do so 😄

[alemabrahao]

Another way could be to configure a monitoring system such as Zabbix to monitor these interfaces.

[Mike6116]

Same problem here,  many of my MX have a secundary link  and im not being able to promptly detect when theese goes down,  also many times when we add a secundary link is because althought of redundancy there is a need for more bandwwith wich may be not possible over one link.